STANDARD EQUIPMENT:        

• 36” diameter filter housing for low “can velocity”, with radial inlet and internal deflector to direct incoming materials into collection hopper.
• Nineteen (19) PTFE high efficiency pleated bag filters rated 99.9% efficient @ 1 micron particle size with 228 square feet of filter area (air-to-cloth ratio of 2.1 to 1 based on 500 CFM. Accessible for maintenance or inspection from two convenient hinged side access doors with captive hardware.
• Continuous pulse filter cleaning with adjustable timing. Includes two off-line cleaning cycles when vacuum is shut down.
• NEMA 4 control panel enclosure with master power disconnect, magnetic motor starter with thermal overload protection, micro-PLC controller for pulse filter cleaning and high level probe. Includes MMI touch pad for start / stop and warning alarms.
• Continuous-duty vacuum producer: positive-displacement (rotary-lobe) vacuum pump, low-speed operation for long service life and low noise levels. Airflow remains constant despite variations in demand in vacuum system. Pump is belt-driven by an 1,800 RPM by a TEFC continuous-duty motor. Includes OSHA-approved belt guard and exhaust silencer.
• Secondary safety filter located ahead of vacuum pump, removable without tools.
• Vacuum relief valve and liquid-filled vacuum gauge.
• No-Flow Valve Assembly: allows vacuum system to operate continuously, even when all inlets may be closed. Includes NEMA 4 control panel with high and low vacuum switches, automatic pneumatic valve with pressure regulator / gauge package. Mounted on inlet to vacuum producer, requires 110v / 1-ph electricity and 1/4” compressed air supply. Includes adjustable slide valve on air intake to allow fine adjustment based on pressure drop in tubing network.
• Collection container: 2 cubic yard (50+ cubic ft.) capacity, self-dump style, reinforced for 16” Hg (220” H2O) vacuum.
• 5000 lb. capacity pallet jack for raising and lowering the collection container. A large gasketed discharge plenum allows for misalignment of the hopper.
• High-level probe, radio-frequency type, with adjustable sensitivity, includes automatic vacuum shut-down and indicator light on control panel.
• Carbon steel construction with blue epoxy finish