|
Monobloc 40
|
|
 |
|
| Product Category |
Central Vacuum System |
| Model Number |
Monobloc 40 |
| Description |
|
| Features |
- 48” diameter filter housing for low “can velocity”, with abrasive resistant inlet and internal deflector to direct incoming materials into collection hopper.
- 37 SBPE, high efficiency pleated cartridge filters rated 99.9% efficient @ 1 micron particle size with 460 square feet of filter area (air-to-cloth ratio of 2.17 to 1 based on 1000 CFM). Filters are easily accessible for maintenance or inspection from two convenient hinged side access doors with captive hardware.
- Continuous pulse filter cleaning with adjustable timing. Includes two off-line cleaning cycles when vacuum is shut down.
- NEMA 4 control panel enclosure with master power disconnect, magnetic motor starter with thermal overload protection, micro-PLC controller for pulse filter cleaning and high level probe. Includes MMI touch pad for start / stop and warning alarms.
- Continuous-duty vacuum producer: positive-displacement (rotary-lobe) vacuum pump, low-speed operation for long service life and low noise levels. Airflow remains constant despite variations in demand in vacuum system. Pump is belt-driven by an 1,800 RPM by a TEFC continuous-duty motor. Includes OSHA-approved belt guard and exhaust silencer.
- Secondary safety filter located ahead of vacuum pump, removable without tools.
- Vacuum relief valve and liquid-filled vacuum gauge.
- No-Flow Valve Assembly: allows vacuum system to operate continuously, even when all inlets may be closed. Includes NEMA 4 control panel with high and low vacuum switches, automatic pneumatic valve with pressure regulator / gauge package. Mounted on inlet to vacuum producer, requires 110v / 1-ph electricity and 1/4” compressed air supply. Includes adjustable slide valve on air intake to allow fine adjustment based on pressure drop in tubing network.
- Collection container: 2 cubic yard (50+ cubic ft.) capacity, self-dump style, reinforced for 16” Hg (220” H2O) vacuum.
- 5000 lb. capacity pallet jack for raising and lowering the collection container. A large gasketed discharge plenum allows for misalignment of the hopper.
- High-level probe, radio-frequency type, with adjustable sensitivity, includes automatic vacuum shut-down and indicator light on control panel.
- Carbon steel construction with blue epoxy finish
|
|
| Technical Data: |
| Performance |
1,000 CFM @ 10” Hg (135" H20) |
| Maximum Vacuum Setting |
14”Hg (189” H2O) |
| Suction Connections |
1 @ 6" OD tube shank |
| Motor |
40 HP TEFC, 1750 RPM, standard efficiency |
| Voltage |
230V or 460V./ 3-phase, 60 Hz |
| Capacity of Container |
2.0 cu. yd. |
| Dimensions |
103”L x 75”W x 168”H |
|
